|
Polyesters
Resins & Hardener
MFR-101b
Laminating Resin - No
surface agent - Low VOC Fumes
MFR-102
Finishing Resin - With Surface Agent so resin dries to the touch
--Low VOC Fumes
--A surface agent resin for general fiberglass repair or thin coats on
wood surfaces.
--Surface agent will prevent tackiness when
applied in thin coats.
Sold in 5 Gallon Buckets - Gallons - Quarts
|
 |
|
Vinyl
Esters Resins & Hardener
MFV-104 Vinyl
Ester Laminating Resin - Low
VOC Fumes
MFV 105a Vinyl Ester for Vacuum
Infusion - Low
VOC Fumes
--Both are a modified Epoxy.
--For Extreme Chemical and Corrosion Resistant applications.
--Easily Heat Stable to Over 300 degrees Fahrenheit finished product.
--Very Low Shrinkage.
--Commonly used in Marine, Aircraft, and Tooling applications.
Sold in
5 Gallon Buckets - Gallons - Quarts
|

|
|
Epoxy
Resins
MFE-201
Unfilled Laminating Epoxy - Room Temperature
MFE-301
Unfilled Laminating Epoxy - High
Temp (400F)
MFE-302
Unfilled Laminating Epoxy -
High Temp (400F) - Aluminum Filled
ADTECH PRO Build
Epoxy Systems
We stock a complete product line of Resins and Hardeners.
|
 |
|
Gel Coats and
Hardener
MF-GC10b Bright
White Gel Coat - Low VOC
--Marine Use - Compatiable Underwater and Water Contact
--Meets State of California Safety Requirements
--Shipping to California and Florida Available
MF-GC11b Nuetral Gel Coat - designed
to take colors - Low VOC
--Marine Use - Compatiable Underwater and
Water Contact
--Formulated for Use with Pigments
MF-GC12b
Clear Gel Coat - Low VOC
--Marine Use - Compatiable Underwater and
Water Contact
--UV Light, Crack and Chemical resistance.
|

|
|
Tooling Gel Coats
All Michigan Fiberglass Tooling Gel Coats
are Performance Gel Coats.
Excellent Abrasion Resistance and Hardness.
Surfaces Temperatures up to 225 F
MF-TG-1
Orange Tooling Gel Coat - Featuring Blister
Resistance and Low V.O.C.
MF-TG-2 Black Tooling Gel Coat - Featuring Blister
Resistance and Low V.O.C.
MF-TG-3 Red Tooling Gel Coat - Featuring Blister
Resistance and Low V.O.C.
MF-TG-4 Green Tooling Gel Coat - Featuring Blister
Resistance and Low V.O.C.
Sold in
5 Gallon Buckets - Gallons - Quarts |

|
|
Resin
Additives Pigments
& Glitter flakes
We Can Custom Match
Any Color To A Supplied Color Sample
Polyster Pigments -Liquid
Form
Powder Pigments - Compatiable with
Polyester Resins
- Epoxies & Urethane Foams
|

|
|
Polyurethane
Foam - Closed Cell - 3/4 LB to 60 LB Density
Poured or Sprayed
for Sculpting and Structure
No Hazards - No Mercury - No TDI - No Ozone Depletion
MF-1002
Urethane Foam 2 LB Density comp A
MF-1002
Urethane Foam 2 LB Density comp B
MF-1005
Urethane Foam 5 LB Density comp A
MF-1005
Urethane Foam 5 LB Density comp B
MF-1010
Urethane Foam 10 LB Density comp A
MF-1010
Urethane Foam 10 LB Density comp B
Pour foams are 2 minute pour time. Minute to mix - minute to pour.
15 minute full rise. 30 minutes to cure.
1 gallon kit of two cans of 2 LB produces 9 cubic feet
1 gallon kit of two cans of 5 LB produces 4.5 cubic feet
Sailboats Marine
and Taxidermy
2 LB often used to hold marine gas tank in floor.
5 LB often used in sailboat rudders.
10 LB used in taxidermy.
|

|
|
Supplies & Tools
Brushes, Paint Supplies
Dispensing -
Fabric Aids & Scissors
Laminate Cutting & Trimming
Mixing Sets & Starter Kits - Mixing Supplies
Saturation Rollers & Squeegees
Spray Equipment - Spray Equipment Replacement Parts
|
  |
|
|
|
|
Fiberglass
Woven and Non-Woven 1/2 oz to 37 oz
Chopped
Strand Mat 1 1/2 to 4.5 oz
Tooling Fabrics.
Kevlar and Kevlar Tape
|
 |
|
Vacuum Bagging
Equipment
Polyurethane
Bagging Film
Nylon Bagging Film
Breather &
Bleeder
Polyester Release
Peel Ply
Nylon Release Peel
Ply
|
Connector
Thru-Bag Connector
Tubing
Tape
Sealant Tape
Flash Tape
|
|
Fillers
MF-F05 Micro Spheres - MF-Colloidal Silica
1/32 Milled Fibers - MF-CF Cotton Flock
NYTAL |
|